FTI FT200A Cold Expansion Power Pack with LB20 Puller Accessory Case and Tooling

FTI FT200A Cold Expansion Power Pack with LB20 Puller Accessory Case andamp; Tooling

Condition: Seller refurbished
“This system has been cleaned and inspected. Repairs were made as needed Unit has been tested and is ”

This Tool has been Cleaned and Inspected.
Repairs were made as required.

MINIMUM AIR SUPPLY REQUIREMENT IS 50 CFM @ 90-120 PSI
This Tool has been Tested and is Fully Operational.

THIS TOOL WILL BE SHIPPED WITHOUT HYDRAULIC OIL.
Recommended Replacement Fluid is ENERPAC HF-101 (NOT INCLUDED)

FTI Tooling Catalog andamp; FT200 Series Operation Maintenance and Repair Manual ARE INCLUDED

Power Pack:
Manufactured by OTC
Model Number: FT200A
Serial Number: 2906P00001
Internal Safety Valve Setting: 10000 PSI

Air over Hydraulic Operation

Pneumatic Drive Motor:
Manufactured by GAST MFG CORP
Model Number: 6AM-NRV-11
Serial Number: 0688

LB20
Little Brute Puller
Max Material Stackup: 2.0″
Bare Tool Length: 13.2″
Nose to Trigger Length: 5″ (Not including Nose cap Assembly length)
Hose Length: 10 Feet
Weight With Hoses: 11.25 Pounds
Compatible with Both Standard or Flush Nose cap Assemblies
Directly Compatible with Standard Type-1 7/16″-20 Threaded Mandrels

The Included Tooling Is USED. Some Items may not be serviceable.
Organizer 1 Contents:
(1) CBCE 14B-1001F Nosecap Assembly
(1) KB2M 101-3111-0-1-35 Mandrel
(1) CBCE 14C-1423F Nosecap Assembly
(1) CBG 14-2-N-1 Combination Gage (.4580 / .4530 / .4500)
(1) CBSR 14-2-N-1 Starting Reamer
(1) CBM 14-2-N-1-30-V1 Mandrel
(1) CBG 14-1-N-1 Combination Gage (.4440 / .4400 / .4370)
(2) CBM 14-1-N-1-30-V1 Mandrel
(1) CBMG 14-1-N Mandrel Gage
(1) CBSR 14-1-N-1 Starting Reamer
(23) CBS 14-1-N-16F Flared Sleeve
Organizer 2 Contents:
(2) CBG 14-0-N-1 Combination Gage (.4280 / .4240 / .4100)
(2) CBCE 14C-1401F Nosecap Assembly
(9) CBSR 14-0-N-1 Starting Reamer
(4) CBM 14-0-N-1-30-V1 Mandrel
(2) CBMG 14-0-N Mandrel Gage
(30) CBS 14-0-N-16F Flared Sleeve
(1) CAG 40 Combination Gage (.235 / .2340 / .2310)
(2) CASR 40-1 Starting Reamer
(2) CAR 40-1-.2470 Finish Reamer (.2470)
(4) CASD 40-1-SCK Starting Drill Bit
(2) CAMG 40 Mandrel Gage
(50) CAS 40-8F Flared Sleeve
(1) Unknown Cone Tipped Hose Assembly
(1) 1/2″ Port Air Line Lubricator (New in Box)

Tooling Storage Case:
Sturdy Aluminum and Steel Shell
Dimensions: 34″ x 16″ x 16″ (30″ Without Rolling Platform)
Made by Flight Form.
FTI Branded
Accessory Case Has Been Modified.
Case is Vertically Mounted on a 1/2″ Plywood Base With Heavy Casters For Ease of Use.
There is Some Light Paint Over-spray on the Exterior of the Case In Places.
There are scratches scuffs and small dings consistent with prior use.
All Included Tooling and Accessories Fit Inside the Case and are Well Protected.
Case is Lockable For Added Security.