Mathey Dearman Magnacut XM Cutting/Beveling Tool W/ Pelican Case

Mathey Dearman Magnacut XM Cutting/Beveling Tool W/ Pelican Case. Case clamps are all broken. Item has been test and operates as intended.

Mathey Dearman’s revolutionary MagnaCut XM enables the welder and pipefitter to cut bevel and even weld steel pipe and steel plate without having to secure the machine to the work surface by Mathey Dearman’s revolutionary MagnaCut XM enables the welder and pipefitter to cut bevel and even weld steel pipe and steel plate without having to secure the machine to the work surface by means of chains clamps or any other device. The secret is in the MagnaCut’s magnetic wheels that secure the machine to the surface with 300lbs of pull. Inside the wheels are rare-earth magnets the strongest permanent magnets made. The MagnaCut XM is an excellent choice when cutting a variety of sizes and thicknesses of pipe and plate. It will cut materials with wall thicknesses from .280” (7mm) to 3″ (76mm) using either a plasma or an oxy/acetylene cutting torch. When cutting steel plate the use of a 1”x 1” x 1/8″ angle iron as a guide strip ensures perfectly straight tracking. In addition the remotely-operated motor control box allows the machine to cut in hard-to-reach locations such as overhead pipes and vertical walls. Even on pipe or plate with coating material up to .015 (.4mm) thick the MagnaCut XM tracks straight and the torch-to-work surface distance is held constant. Welding with the MagnaCut XM Many companies have gained a decisive advantage by using the MagnaCut XM as a tractor for a machine welding torch for long tedious horizontal stringer welds. The machine is available with a rack adjustable torch holder for a 1 3/8 inch (35mm) machine torch with 32 pitch or a metric torch rack. The MagnaCut XM can propel the welding torch at speeds from 2″ to 40″ (51mm to 1016mm) per minute depending on the welding source gas mixture and deposition rate.

FEATURES:

MINIMUM SET-UP TIME—just set the distance between the torch tip and the work surface
VERSATILE—cuts pipe plate walls and overheads
SAFE—Speed and direction of both machine and torch arm speed are remotely controlled
AMAZING HOLDING POWER—strong rare-earth magnets hold fast to any magnetic receptive surface with coating up to
.015″ (.4mm) thick.
FAST—Up to 80% faster than cutting by hand.
MagnaCut XM Kit includes:

Base Machine
Motor Control Box
Electric Torch Arm
Torch Holder
Torch Support
Hose Support